Product Sheet


BASIC USE: Livers Bronze BUTTON RAIL railing system is a pre-engineered component based railing system, shipped to the jobsite ready to install.

LIMITATIONS: BUTTON RAIL railing system is only limited by the materials from which it is fabricated.

Pre-engineered railing should be assembled using the components listed:

BUTTON ASSEMBLY: (2) 2 1/2” diameter stainless steel button sets mounted to 3” x 9” x 5/8” steel plate. Spacing between button assemblies at 20” O.C. maximum.

ASSIST RAIL: 1 1/2” round stainless steel, aluminum or bronze. 2” round hardwood (sanded only) also available.

OPTIONAL CAP RAIL: “MN” (stainless steel channel cap) & 1 1/2” round stainless steel profiles with a long grain directional or polished finish.

FINISHES: Standard circular grain satin and polished finishes are available for stainless steel & bronze railing. Powder coat for aluminum. Standard satin finish on Buttons.

GLASS: 1/2″ clear tempered or laminated plate glass furnished by Livers Bronze for BUTTON RAIL system.

Technical Data

The BUTTON RAIL railing system is designed to meet performance criteria as outlined in IBC 2012.


Livers Bronze exclusively manufactures the handrail system as described on this page.


Livers Bronze BUTTON RAIL railing system must be attached with fasteners and to surfaces that are approved or selected by the manufacturer and shall be detailed on all shop drawings.

Availability & Cost

Availability: BUTTON RAIL railing system is subject to current delivery schedules. Each project must be reviewed before scheduling is available.

Cost: Varies according to quantity and material. Further information may be obtained from Livers Bronze or one of its authorized representatives.


Livers Bronze warrants that its BUTTON RAIL railing system is of sound quality, conforming to standards as stated under “Technical Data” and is reasonably free of defects in material and workmanship. Inasmuch as Livers Bronze has no control over the installation of its products, no other warranty is expressed or implied. Livers Bronze does not warrant against glass breakage.


The surface of Livers Bronze material can be kept clean by the use of ordinary soaps and mild cleansers. Abrasive cleaners should not be used.

Technical Services

Technical services are rendered direct from Livers Bronze in Kansas City, Missouri.